When picking out a jackshaft garage door opener a couple of years ago, I went out of my way not to get anything that has MyQ. Overhead Garage Door (the company) stocks what they refer to as Odyssey 2000, and it comes with an optional WiFi module, which I skipped. The opener is more than happy to just toggle open/close state if the contacts are momentarily bridged.
I paired it with Zen17, though in hindsight I could have just gone with an esp32 hidden right next to the motor.
Open/closed state is reported by a separate tilt sensor, which I might also swap for something else if only not to have to swap yet another battery
Chamberlain actively fights all attempts at third parties buildnig tools to control/monitor/use their garage door openers so they can sell subscriptions.
Giving them money in the first place is a horrible idea.
I wonder why they spend the effort. It seems like the people willing to pay and people willing to hack are different. With the hackers be a small group anyway
Same reason any other company lawyers up when a handful of nerds modify the hardware they bought and own - it gets some suity dude's nose out of joint.
They're asking for legislation to address their predatory practices about as hard as you can. If I buy a garage door opener I should own access to it without the bullshit.
Had to get a new garage door opener because the old one stopped working. Got a MyQ opener because it seemed like an excellent choice. Now my car wants me to pay for a subscription to open the door and the remotes that came with the damn thing have super-short range.
On top of that I live less than a mile from an airport directly in the descent path so there is basically 0 mobile service at my home. Often the MyQ app fails to function at all.
My old garage door opener got the damn thing open every time without issue. Would love to have it back.
If your vehicle has HomeLink or can get it installed it should work with even the new MyQ garage openers. I had one installed on my Tesla for my garage opener.
I did the first one. AFAIK it doesn't quite work with all garage door openers because they started using special switches that don't just close the circuit.
Sometimes you get what the installer has in stock, I didn’t really “pick” Chamberlain, it’s just what the guy put in when I paid him to “fix my garage door”. For a lot of other people it’s just what comes with the house.
The correct answer is to just let your garage door opener be dumb, and buy a RatGDO, which works with any dumb opener including chamberlains: https://ratcloud.llc/
I like to think chamberlain sells their openers at a slightly lower price than they otherwise would, hoping to recover it on subscriptions. So by buying their opener plus a RatGDO, I’m hurting their bottom line just a tiny amount. It makes me feel good at least.
Unfortunately Chamberlain Security + 3.0 openers are not supported. If I ever need to replace my current garage door opener I will be looking for a non-Chamberlain product.
Unfortunately new chamberlains now come with Security 3.0, which is designed to lock out ratgdo and everything else, probably forever. So you’re kind of screwed if you’ve bought one recently.
I never understand the appeal of RatGDO. You can find other tools like Shelly 1 that can be easily integrated into your existing Zigbee/Matter ecosystem, or part of the Home Assistant via the HTTP interface, and they are much cheaper with proper UL certification.
You don’t have to buy the expensive official ratgdo device. The ratgdo software is free and you can build a small PCB for a few bucks plus the cost of the ESP32 and a couple of components. My house unfortunately came with MyQ openers so that’s what I’m doing.
there are no workarounds or options for their new security 3.0 models, you are just screwed. Their subscription or nothing. Just dont buy a Chamberlain/liftmaster.
Guess why this happened, to a brand with a previously stellar reputation? yep they got bought by PE.
A lift spring on my old (1995) Chamberlain garage door broke one day. It basically shattered, sending a couple chunks of spring steel flying around the garage bouncing off of all the crap that I have "stored" out there. It was loud. We had no idea what had happened and I went outside trying to track the noise thinking that maybe a deer had run head-first into the garage door or...
Anyway, I decided based on the noises that it must involve something inside the garage. Good luck finding anything in there. I opened the door with the clicker remote and didn't notice any issues so I walked the "path" through all the accumulated things that needed new homes and as I was making my way back out the door I saw an unusual chunk of steel on the floor and a pulley that I know had not been there the last time I was in the garage. I began visually searching everything inside the garage trying to match those items found on the floor and that is when I saw the spring dangling on one side of the door and the lifting cables drooping.
That's when it hit me that I'm lucky our cars don't fit in there any more. All the energy stored in that spring when it popped could've cost me a couple of windshields, some body panel damage, etc but since my garage collects unfinished projects instead of automobiles all of the flying garage door parts bounced off of boxes and the sheetrock walls and did not damage anything important.
We briefly considered calling a garage door installer to deal with it so that we could replace both of the doors (two-bay garage). They had replaced a door on my shop a few years back and were reasonably priced and that Chamberlain door has functioned perfectly. Since the only parts compromised were the springs, pulleys, and cables on one side of the door I decided not to replace the door. There are spring kits available that allow a DIY replacement in a few hours so I went that route. Very inexpensive.
After reading comments here I am so glad I did not buy new doors. The last door we bought was produced before all the enshittified cloud crap. I replaced the remote panel controller this summer with a new, cheap control panel that looked identical on the outside but is slightly different internally since it is a generic replacement for the OEM part. Works great.
I'm happy it's possible, but I'm not sure if I'm sufficiently happy to offset the fact that it's necessary.
This also makes me wonder why it's necessary. What requirement were they trying to solve for? Does lack of Internet connectivity mask some bigger problem with the firmware on the device periodically needing a restart?
A bit of context that didn't make it into the writeup:
The 819LMB is a HomeKit based device, meaning by HomeKit spec it is supposed to function 100% locally on your LAN with zero internet access. (most connect it to home assistant)
In their infinite wisdom, Chamberlain decided to cripple it anyway: if the garage door opener cannot reach their cloud, a firmware watchdog triggers a hard reboot every 30 minutes, taking down local HomeKit control along with it. Additionally, if you don't block the internet the right way, it reboots every 10 minutes in addition to the 30 minute reboot.
There’s so little to these machines. Seems like an open source PCB to replace the proprietary would be feasible. Relays, limit switch inputs, obstruction sensors, current sensors, control input. Commodity stuff. I’m sure chamberlain is doing everything they can to make it seem more mystical than it is. Just to make number go up I suppose
Unfortunately new chamberlains now come with Security 3.0, which is designed to lock out ratgdo and everything else, probably forever. So you’re kind of screwed if you are getting one today
very cool work. Clearly Chamberlain is very poor at writing software interfaces. I’ve witnessed duplicate closure commands that almost damaged my vehicle. There are many customers with damage due to MyQ on Reddit.
My g-d I hate the MyQ software with a passion. Nothing works on it consistently except for the ads they show. Two-factor auth? You're going to have to do it multiple times. Set your security preferences, they'll reset them at will. Notifications about the garage door being open, closed, etc.... More like we'll notify you about ads and things we want to sell.
I paired it with Zen17, though in hindsight I could have just gone with an esp32 hidden right next to the motor.
Open/closed state is reported by a separate tilt sensor, which I might also swap for something else if only not to have to swap yet another battery
Giving them money in the first place is a horrible idea.
Had to get a new garage door opener because the old one stopped working. Got a MyQ opener because it seemed like an excellent choice. Now my car wants me to pay for a subscription to open the door and the remotes that came with the damn thing have super-short range.
On top of that I live less than a mile from an airport directly in the descent path so there is basically 0 mobile service at my home. Often the MyQ app fails to function at all.
My old garage door opener got the damn thing open every time without issue. Would love to have it back.
https://www.meross.com/en-gc/mTerminal/smart-garage-door-ope...
The correct answer is to just let your garage door opener be dumb, and buy a RatGDO, which works with any dumb opener including chamberlains: https://ratcloud.llc/
I like to think chamberlain sells their openers at a slightly lower price than they otherwise would, hoping to recover it on subscriptions. So by buying their opener plus a RatGDO, I’m hurting their bottom line just a tiny amount. It makes me feel good at least.
https://ratcloud.llc/pages/frequently-asked-questions
Guess why this happened, to a brand with a previously stellar reputation? yep they got bought by PE.
Anyway, I decided based on the noises that it must involve something inside the garage. Good luck finding anything in there. I opened the door with the clicker remote and didn't notice any issues so I walked the "path" through all the accumulated things that needed new homes and as I was making my way back out the door I saw an unusual chunk of steel on the floor and a pulley that I know had not been there the last time I was in the garage. I began visually searching everything inside the garage trying to match those items found on the floor and that is when I saw the spring dangling on one side of the door and the lifting cables drooping.
That's when it hit me that I'm lucky our cars don't fit in there any more. All the energy stored in that spring when it popped could've cost me a couple of windshields, some body panel damage, etc but since my garage collects unfinished projects instead of automobiles all of the flying garage door parts bounced off of boxes and the sheetrock walls and did not damage anything important.
We briefly considered calling a garage door installer to deal with it so that we could replace both of the doors (two-bay garage). They had replaced a door on my shop a few years back and were reasonably priced and that Chamberlain door has functioned perfectly. Since the only parts compromised were the springs, pulleys, and cables on one side of the door I decided not to replace the door. There are spring kits available that allow a DIY replacement in a few hours so I went that route. Very inexpensive.
After reading comments here I am so glad I did not buy new doors. The last door we bought was produced before all the enshittified cloud crap. I replaced the remote panel controller this summer with a new, cheap control panel that looked identical on the outside but is slightly different internally since it is a generic replacement for the OEM part. Works great.
One could just end up repacking the image with their own certificate chain, or patching out the reboot itself.
This also makes me wonder why it's necessary. What requirement were they trying to solve for? Does lack of Internet connectivity mask some bigger problem with the firmware on the device periodically needing a restart?
2. no internet connection means it’s not working properly
3. reboot usually fixes things
4. therefore, if no internet connection, we should reboot.
Of course 1 and 2 are the real issue, I wish device makers would design devices that treat internet connectivity as always optional.
The 819LMB is a HomeKit based device, meaning by HomeKit spec it is supposed to function 100% locally on your LAN with zero internet access. (most connect it to home assistant)
In their infinite wisdom, Chamberlain decided to cripple it anyway: if the garage door opener cannot reach their cloud, a firmware watchdog triggers a hard reboot every 30 minutes, taking down local HomeKit control along with it. Additionally, if you don't block the internet the right way, it reboots every 10 minutes in addition to the 30 minute reboot.
Similar to media piracy, I've never seen a more motivated group of individuals to seize and automate.
Frankly it's lovely. You'll never beat passion like that.
I now only use MyQ as a last resort.
God what fucking fuckwads